Home Pottery Wheel • Tips for Choosing a Pottery Wheel

Tips for Choosing a Pottery Wheel

 - 
Tips for Choosing a Pottery Wheel

There are a few things to consider when choosing the right pottery wheel. Make sure you have all the tools you need when it comes to making the perfect wheel creation. Sponges, water bucket, wire tools, needle tools, cut rubber pieces, wooden ribs, and a shammy. But before you pick the right clay for your wheel, you want to make sure you have a wheel bat. The wheel bat serves as the tool used to remove the clay creations easily from the wheelbase. The wheel bats are made from different items, but it’s important to make sure the bat does not stick to the clay. The throwing clay directly on the wheel head is fine, but it will be impossible to remove the finished work.

When it comes to the right pottery wheel, it has to do with a few factors. How much do you want to pay for the tool, and what is the right tool for you? What size wheel do you want? A 14” for a pottery wheel is the average size. If you are looking for working a particular size that is less than 50lbs of clay at a time, then the wheel needs to have an adequate motor mount, and the wheel itself needs to be completely secure. There needs to be no movement from the wheel because it can unbalance the symmetry of the work.

Tips for Choosing a Pottery Wheel

Make sure your pottery wheel has a reverse switch. Trimming from clockwise to counterclockwise will create a change in the workstation and about the artist to manipulate the clay alternatively. There is a special consideration when it comes to the horsepower of the motor. Make sure you do a little research for the specs on the motor, so the strength can turn the weight of the clay you want to work. Large motors will keep cooler longer and given the right workspace; your wheel will keep balanced and turn at the speed needed for the right project.

Make sure the wheelbase as holes for mounting the bats. When the wheel bat is fitted on the base, it will not throw the clay off balance. A balanced, mounted, large motored pottery wheel will make the perfect tool for the flourishing artist. The workplace is essential for any job. When it comes to hobbies, if you’re just a budding pottery master, you will need enough space around the wheel to make sure if you get spinning mud on it (and you will get splashing clay on every surface) you can clean it easily. It’s good to have a large open area for working. for more related information, visit :http://www.smith.edu/hsc/museum/ancient_inventions/potterwheel2.html

If the motor is noisy, you might want to consider ear protection. There are motors that have less whine, but they are usually more expensive. The next consideration is whether you want electric or kick wheel. However, a kick wheel can cost a considerable more than an electric start. If you want something portable, you will need to make sure you either have help moving the wheel safely, or get a wheel that is not as heavy.

Please follow and like us:

Author:Pottery Wheel